Knowing the Essentials Of Plumbing In Omaha NE

As the saying goes, knowledge is power. Plumbing knowledge is something that every homeowner should be familiar with. The knowledge won’t hurt and if anything it will make you wiser. 

Basic Plumbing in a residential home

In a home, plumbing is inevitable. There is plumbing in every corner of the house that you set your eyes on. The kitchen is one of these places. There might be one or to faucets in the kitchen depending on the size of it. Water flows into the faucets via a pipe from the water source precisely the main pipe. Around the kitchen, you will also find a dishwasher which needs a regular water supply. The connection is made possible by pipes.

Water heaters are another type of fixture found in a home. Water heaters are of three types, conventional, tankless and hybrid water heaters. Each type has its own mechanism of getting the water inside it hot. This is another important consideration in putting up a water heater.

Moving on, there are other fixtures such as bathtubs, showers, and toilets. These need to be properly out in a place so that they can set a good image for guests. They need the best maintenance as well to avoid leakages that will leave your bathroom stinking so badly. These fixtures also require a very good drainage system. There are also faucets in the bathroom that need a good fixing.

In homes, water comes from the mains and the waste is taken out through the drainage system. A good drainage system is, therefore, essential to prevent clogged pipes or blocked sinks.

Commercial plumbing

Commercial plumbing covers all plumbing fittings and fixtures in large buildings such as residential complexes and condos, shopping malls and industrial buildings. The plumbing is involved with installation and maintenance of systems that supply water and take out waste from these commercial buildings. The types of fixtures found in this commercial set up are similar to the ones in households only that installation of the same is done in large scale.

In these kinds of buildings, emergency and maintenance work is done regularly to ensure that problems such as water leaks and blocked drains are fixed in time to ensure that activities in the building run normally. It is ensured that water supply system is working appropriately and that for disposing of water also functioning.

Importance of plumbing

One fact is that plumbing is hard to do without and the need for a reliable Omaha Plumber. It has a wide range of benefits some of which are stated below.
Plumbing tags along beauty and comfort into our homes. It avails soothing and relaxing baths.

  • Plumbing is important in the job sector in that it a major source of livelihood for citizens in many economies.
  • Through ensuring a flow of clean water into buildings and proper disposal of waste, plumbing ensures that the lives of many people are saved and that people continue to live a healthy life every day.
  • Water is saved using advances in plumbing technology especially in drought-stricken areas all over the world. For example, Denver made a record in water saving back in 2014.
  • Plumbing should be well embraced as it has massive positive outcomes. It also essential to have skills and even knowledge in plumbing to aid in repairs and to be on the safe side when it comes to building plumbing solutions.

Omaha Plumber Service Area Map


Top 10 Plumbing Matters In Health And Safety


Today In Omaha Homes Plumbing Matters A Lot Than Ever Before

World plumbing day was observed on March 11, 2015. Plumbing has got severe importance in today’s modern world because today there is a great need to save water and other scarce resource. And plumbing plays a vital role in saving water.

All these points and various other propositions were discussed in various programs and forums on world plumbing day. Here is a brief rundown of some important factors that plumbing has on our lives:

Why plumbing matters to health, safety, water sustainability and more

In celebration of World Plumbing Day, March 11, Plumbing Manufacturers International, members of which produce about 90% of the nation’s plumbing products, developed these 10 reasons why plumbing matters. Why does plumbing matter to you?

1. Plumbing harnesses a precious resource — water — to use safely for health, hygiene and well-being. Plumbing makes possible the miracle of clean, convenient water — something often taken for granted.

2. Plumbing manufacturing innovations to gain water efficiency have dramatically reduced the amount of water used through toilets, showerheads, faucets and other plumbing products. For example, WaterSense-certified plumbing products meeting Environmental Protection Agency criteria have saved consumers 757 billion gal. of water and $14.2 billion in water and energy bills since 2006, according to the EPA.

3. To assure customer satisfaction, WaterSense products are certified to perform as well or better than standard models — all while saving at least 20% more water.

4. The increased use of water-efficient plumbing is an important, yet often overlooked, part of the water sustainability solution. The EPA estimates that the United States could save 3 trillion gal. of water and more than $17 billion dollars annually if every U.S. household converted to WaterSense-certified products. High-efficiency plumbing in commercial facilities can help save even more.

5. Modern plumbing products help regions affected by droughts and water shortages to use water more efficiently. For example, Denver reduced water use to a 40-year low in December 2014, according to the Denver Post. Contributing to the decrease was replacing 3,200 3.5 gal. per flush toilets in the Denver Public Schools with 1.25 gpf toilets. Denver has plans to replace 6,800 more by 2018.

6. Water efficiency contributes greatly to energy savings. Less water used means less water heated and less water transported. Installing WaterSense-labeled faucet aerators in bathrooms, for example, helps save water and energy.

7. Plumbing brings comfort and beauty into homes and lives. Kitchens and bathrooms not only serve functional purposes, they provide the refuge of comforting meals, soothing baths and restorative relaxation.

8. The plumbing industry is a strong economic engine, providing jobs and livelihoods to millions of people around the world.

9. The ability of plumbing and sanitation systems to deliver clean water and remove waste has protected populations from communicable disease throughout history. There is acknowledgement from many within the public health community that clean, drinkable water has likely protected more lives and extended life expectancy more than any medical advancement. Plumbing advancements continue to protect lives in developing nations.

10. A future of water sustainability is an achievable prospect, as plumbing manufacturers work with allies in safe plumbing and water efficiency to find solutions.

Did you learn on those plumbing matters above?

Don’t wait until its too late for your plumbing to regret before you realize that you did not take care of your plumbing system. If you notice a small problem in your plumbing don’t wait until the issue will worst, call a local plumber at 402-934-7444 to have them check and fix. For a better plumbing condition set an annual inspection every year this could help you to avoid costly repair.

For More Related Articles:


Loosen A Stuck Plumbing Shutoffs


How To Unstuck Your Omaha Plumbing Shutoffs Carefully?

Shut-off valves, also called stop valves or angle stops, are typically tucked into some unobtrusive spot, making them easy to ignore. Over time, however, minerals in the water accumulate around the stem and harden; the unused valve stiffens and eventually sticks. Of course, most people discover this only when a broken pipe sprays water all over the place.

But what if this time has come that you discover a plumbing repair and you don’t have any idea on how to unstuck you plumbing shutoffs. Read more below to learn.

How to Open Stuck Plumbing Shutoffs

Shutoff valves are usually oval-shaped handles behind or under the fixture.

Shutting off the water to a faucet, toilet or entire house is the first step to almost any plumbing repair. If you don’t turn the shutoff valve a few times each year, mineral deposits from the water can build up on the valve and cause it to stick. Discovering a stuck plumbing shutoff can be a frustrating beginning to a plumbing project, but it doesn’t spell disaster. Don’t force the handle, which may be delicate and can break under pressure. Instead, approach the problem more delicately.


Locate the bonnet nut, which is behind the valve handle on the stem that attaches it to the pipe. Lay a folded towel under the valve and bonnet nut to soak up any water that drips as you work.


Fit an adjustable wrench over the bonnet nut. Turn the nut a few millimeters counterclockwise. Loosen it just enough to create a little slack in the valve mechanism. Expect it to begin to leak.


Turn the valve using a shutoff valve wrench. These wrenches are specifically designed for this job, with an oval-shaped depression in the body of the tool that fits neatly over shutoff valves. If the valve doesn’t turn easily with the wrench, loosen the bonnet nut a few hairs further and try again.


Tighten the bonnet nut with the adjustable wrench until it stops leaking.

Things You Will Need

  • Towel
  • Adjustable wrench
  • Shutoff valve wrench


  • Open and close the shutoff valve a few times a year to keep it in smooth working order.
  • Don’t wait until you have a plumbing emergency to try to turn the shutoff valve. Make sure you know where it is and how it works before you need it.

Get A Help From The Experts.

Opening stuck plumbing shut-offs is something that you have to do very carefully to avoid any long term damage. Open stuck plumbing shut-offs with a help from an expert of American Rooter Inc. can help you prevent any worst repair that it might to happen because of a self repair done. Call us today at 402-934-7444 to schedule a service.

For More Related Article:


Things To Remember About Your Omaha Shower Plumbing


Omaha Shower Plumbing Do’s And Don’ts

You will believe it or not, many plumbing issues are a result of easily avoided mistakes. A Omaha professional plumber will help you with any problem you may have, but there are a few common practices that even plumbers wish their clients would abandon. If you’re experiencing more plumbing problems than usual, these tips will help to keep your pipes in good condition.

The Do’s and Don’ts of Shower Plumbing

As a homeowner, most people would like to think they can handle their own repair service and plumbing on their own. Well, we’re here to tell you that many homeowners find themselves stuck in a rut after making a costly plumbing mistake. It is always best to let the professionals handling plumbing, especially when it comes to shower plumbing. There are too many moving parts and intricacies that should be considered when performing extensive repairs in the bathroom.


Your shower drain tends to become clogged more often than any other fixture in the home. Clogs occur mostly because of all the hair and grease that gets washed down it on a daily basis. To prevent a serious clog, pour two or three gallons of boiling water down the drain once per month. The water will remove any build-up.

One aspect of shower plumbing most homeowners never even consider are the building codes in your area. Believe it or not, even in a private residence or home, you cannot just alter the plumbing without alerting the proper authorities or checking the building codes and legislation.

Finally, do hire a professional plumbing company to handle your shower plumbing. Our expert technicians understand what they are doing and have the right tools to complete the job.


For starters, do not rip apart the shower in the hopes of either installing a brand new fixture or removing a clog. If you go in half-cocked without any prior knowledge, you risk ruining the plumbing system and causing extensive damage. If you have no previous plumbing experience, let a professional handle the task.

Avoid doing DIY to avoid a costly repair in your plumbing.

If any of these issues sound familiar, it might be time to look for a plumber located in Omaha. Call our office at 402-934-7444, we take plumbing emergency call that needs an immediate fix.

For More Related Articles:


Common Electric Shower Problems


Why Does Your Omaha Electric Shower Keep Cutting Out? Hmmm..

You’ve just jumped into a nice hot shower when middle later it cuts out. Although it’s annoying, it’s actually a common scenario for homeowners with electric showers. However, there are ways to fix the issue.
If you’re wondering why your electric shower keeps cutting out, it could be a result of low water pressure. Read more the article below that explain where the problem lies and how to rectify it:

Electric Shower Problems

Electric Shower Problems & Cures

Martin Smith explains as an experienced emergency plumber, Martin has come across plenty of electric shower problems. Some plumbing problems with these showers can be a balance of old showers and new showers and is very strongly recommended when buying an electric shower is to buy the best electric shower that has a long live.

In the picture to the right, the hotspots are pointed to areas that have electric shower problems and can be common water leaks or just not working resulting in the need for an emergency plumber. In each step Martin will explain each hot spot and common searches made by the public to what the problem can be with there electric shower. We will give you the common questions then we will answer them in the best way we feel.

12 Common Question About Electric Shower Problems

  • The trip switch to my electric keeps going off when I turn my shower on, what can this be?
  • I can smell burning from my shower, is this safe?
  • I have power to my shower, why will it not come on?
  • The shower on my wall in the bathroom is loose, is this dangerous?
  • I have water leaking from my mains water feed in my bathroom, can this be fixed?
  • The feed pipe to my shower is loose and also pouring out water, is my shower broken?
  • My heat settings isn’t making any difference to my shower?
  • The on an off button to my shower isn’t working, now what?
  • The pressure to by shower won’t turn, does this mean the shower is jammed?
  • There is water coming from the shower near the shower hose?
  • My shower hose in the bathroom is leaking, do I need to replace it?
  • The pressure to my shower is low and there is no hot water coming out?
  • If I have electrical shower problems and also guarantee, will the manufactured come out?

The trip switch to my electric keeps going off when I turn my shower on

If the trip to the shower goes off when you turn the shower on, then this is most likely because there is either a detection of water in contact or there is a neutral to live contact. If there is any type of bad contact on the electric wiring causing the wiring to heat up, then this can be another way to cause the electric to trip off.

I can smell burning from my shower

If you smell burning from the shower, this is most likely going to be wiring problems or a problem from the above paragraph.

I have power to my shower but not coming on

If you have power to your electric shower, but is not coming on, this can be either an electrical contact problem or the PCB as gained a fault which you may need to replace. We have a similar article to this, which is about my shower not working.

The shower on my wall in the bathroom is loose

If the shower in the wall is loose, this can be very dangerous, mostly because there may become a breakage and secondly, there is an electrical current. The electrical current on the shower is only dangerous if the electric has not been done correctly and is not update with the current electrical laws. Another problem with a loose shower is the mains water feed connecting into the shower is not build to withstand the weight of the shower and there break causing water to flood. It is very important when fitting a shower that the wall is flush and the shower is screwed into the wall correctly.

I have water leaking from my mains water feed in my bathroom

If you have water leaking from your mains water feed in your bathroom, this is possible the compression nut or (read up in the paragraph below).

The feed pipe to my shower is loose and also pouring out water

If there is water leaking from the water inlet pipe and the pipe is loose. This is most likely due to the plastic connection as shown in the diagram above (2) is broken. If this is broken then you may need to either order an new one from the manufactures or replace the complete shower.

My heat settings isn’t making any difference to my shower

If the heating handle or switch is not making any difference to the shower, then this is most likely going to be either an electrical problem or the internal valve is broken of which you will need the complete shower replaced.

The on an off button to my shower isn’t working

If the on and off button is not working on the shower, then this may be an easy fix as the part can be ordered and easily replaced. At the worse, the electric shower can be replaced

The pressure to by shower won’t turn

If the water pressure handle to the shower won’t turn, then this may be due to a lime scale or muck build up causing the shower valve to fur up and not turn on, this may result in replacing the shower as the most likely hood is that there will be break well trying to turn the valve.

There is water coming from the shower

If there is water coming from the shower and not the feed pipe, this can be a number of internal plumbing problems within the electric shower, which then means you will need to replace your electric shower unless it is a simple nut or washer that can be fixed.

My shower hose in the bathroom is leaking

If the shower hose within the bathroom is leaking water and there are washers in both ends of the hose. It may only need an hand tightening up, otherwise it will be better to just buy a new shower hose and shower head.

The pressure to my shower is low and there is no hot water coming out

Most electric showers require a minimum amount of water pressure to pass through in order to turn the heating switch within the shower so that it heats up. The only remedy for this is to find a better source of water pressure.

What happens when I have electrical shower problems but also have guarantee

If you have a guarantee when you have electrical shower problems, the best thing to do is to contact the manufactures and explain what is going on. If the shower is fitted correctly and there are electrical shower problems within the guarantee period. As long as you have a reputable manufactures that will come out, then this will most likely be the best option and to leave the faulty electric shower problems to the manufactures.

What is the best thing to do when I have electric shower problems

If you have electric shower problems and the shower has been correctly fitted including the isolation valves, the best thing to do before calling an emergency plumber on a call out, is to isolate the water by quarter turning off the isolation valve and turning the trip switch off on the mains electrical board for the shower. This will no longer make it an emergency plumbing issue other than requiring a shower for cleaning purposes.

Our Omaha Plumbers are capable to do the repair in your electric shower because they are trained to be an electrician too.

If you need an electric shower replace or repair we at American Rooter can help you fix the shower issue, give us a call at 402-934-7444. We also fix any plumbing repairs or emergency plumbing that needs an immediate response.

For More Related Articles:

The post Common Electric Shower Problems appeared first on American Rooter.


Who To Call When You Have A Leaking Appliance

Major plumbing problems have the potential to disrupt your daily schedule and affect the property in your home


When a serious plumbing issue arises, it’s best to leave the plumbing repair job to your American Rooter emergency plumber. Knowing when to call your plumber for immediate help is the best way to minimize the severity of common home plumbing issues, conserving water and reducing the short- and long-term impact of a leak, clog, or especially the damaged appliance.

Below are the leaking appliances that an emergency plumber can handle.

Leaking Appliance

Leaking Appliance – Is it the job of an emergency plumber
Got a leaking appliance and unable to stop the water leak? Need an emergency plumber or an appliance specialist? Maybe you can’t decide and don’t know where to look!

Having a leaking appliance can be a common water leak when it comes to within your home, the problem is, the occupant some times doesn’t know on who to call. Is it a leak from within the washing machine or is it a leaking pipe from behind. Unless your able to pull the washing machine out, the chances are, you may never find out, unless you call upon an emergency plumber.

If I have a leaking appliance, can an emergency plumber come and fix it

A question asked to plenty of emergency plumbers about the leaking appliance being fixed. So many times an emergency plumber has to turn them down and say, “your going to have to find an appliance specialist”. The occupant then asks “who do I call?”. With the response from the plumbing engineer of, “I think you need to call a washing machine specialist”. With no help at all, the customer then carries on calling around emergency plumbers.

It’s not the first time a occupant has called an emergency plumber to come out and fix a leaking appliance and for the plumber to turn up and say “I can’t do that” and it won’t be the last time a occupant calls out an emergency plumber.

The best thing a customer can do when there appliance has a fault or a minor leak on a normal day for example: If your washing machine is not working then you would put in the search engineer ‘washing machine repairs‘ followed by your local town. If your dishwasher isn’t working, then you would search for ‘dishwasher repairs‘ followed by your local town. You may also want to do a more direct approach by putting in ‘electrical appliance repairs‘ followed by your local town.

When does a leaking appliance become an emergency plumber situation

The only time, when a leaking appliance becomes an emergency plumbing situation is, when the customer is unable to get an immediate appliance specialist or unable to turn the isolation valve off to the appliance. Due to the ability to turn off the appliance in an emergency, it is very common, that an occupant will call an emergency plumber to come out and just isolate the water supply in an emergency.

Unfortunately when looking for an appliance specialist 24-hours or in an emergency, you will be unable to find one, the only thing that can be done, is to isolate the appliance and leave until it is convenient for the appliance specialist comes and has a look.

Major plumbing leaks require targeted plumbing repair to eliminate their cause and restore function in the affected line.

Knowing how to handle a plumbing emergency is a positive step towards lower water bills and reduced stress if your home does develop a plumbing issue. American Rooter is here to offer 24/7 emergency plumbing in Omaha, as well as full-service plumbing solutions that include general plumbing, water heater repair and replacement, and sewer line clog resolution. Call us today at 402-934-7444.

For More Related Articles:

The post Who To Call When You Have A Leaking Appliance appeared first on American Rooter.


Back Flow Valve Annual Testing


What Is It and Why Is It Important To Do A Back Flow Valve Testing In Omaha Homes?

You want clean, safe drinking water in your water system. Backflow is an undesirable, dangerous event of the flow of water being reversed from the intended direction in a pipe or system.This is a serious situation and may potentially allow drainage and sewage water to contaminate drinking water in your home or office plumbing system, making it unsafe and unusable.

Below is the explanation why annual back flow valve testing is important and needed annually.


It is important to perform active maintenance on plumbing in homes and businesses so as to discover problems that could lead to potentially extensive damage later on or compromise the health of individuals’ drinking water from a specific plumbing source. An important aspect of plumbing maintenance includes back-flow valve testing. This type of testing should be performed once a year to ensure proper function and safety.

A back-flow valve is required when a safe water source used for drinking water (potable) is connected with a water source that is not safe for drinking (non-potable). The back-flow valve prevents the non-potable water source from contaminating the potable water source. The back-flow valve keeps undesirable material (whether it is contaminated water, other fluids, gasses, or solids) from entering the potable water source. Put simply, the back-flow valve prevents water from flowing in the opposite direction it was intended.

As is evident, it is important to check back-flow valves to make sure they are working correctly. Checking these valves ensures that the potable water source at a home or business remains uncontaminated, guaranteeing that individuals, families, and employees are safe and have access to clean drinking water without worry.

When individuals, business owners, and families are looking for qualified plumbing companies to check their back-flow valve function, it is important to find a company with plenty of experience and the integrity to complete the job in a timely manner and that will only perform maintenance if it is necessary. Since checking the function of back-flow valves is an involved and in-depth process, it is important to find a trustworthy company that will treat a home or business with care and perform the necessary tests in a professional manner to ensure that the back-flow valve is functioning properly and that individuals have access to clean, uncontaminated drinking water.

If one believes there is a problem with the water supply due to a back-flow valve issue, some plumbing companies are even available on nights and weekends to assist with serious problems such as these. Companies that are commission-free won’t feel the need to try to create a problem that isn’t there just to make money, so this is another important aspect to consider when searching for a company to help with back-flow issues or just to check the valves to make sure there isn’t a problem. Companies should ensure proper documentation of the findings when checking the back-flow valve and provide that to the customer so that they can have it for the next annual test they have done on their home or business.

Back-flow valves are a very important aspect of a home or building’s plumbing and should be taken seriously so as to prevent loved ones, employees, customers, etc. from coming into contact with water that has been contaminated. In addition, it is also important to seek out a professional plumbing company characterized by integrity and honesty. Back-flow valves keep families and workplaces healthy, so it only makes sense to hire the best of the best to work on the plumbing that keeps families and businesses safe and on-track.

Keep your home and family safe by calling a plumber to test your backflow preventer every year.

Only a licensed and experienced plumber can test your backflow assembly properly. Licensed plumbers are allowed to operate and test the valves of the backflow devices and can generate certification paperwork for the city. Want to learn more about backflow testing and need a help from the experts? Call us today at 402-934-7444 to schedule a service.

For More Related Articles:

The post Back Flow Valve Annual Testing appeared first on American Rooter.